T2 UPS Surge Protector for surge purpose ESCB-80TB/4P

Fill the Contact Form and Get Reply in 2 Hours

Fortsurge special backup protection device for surge (SSD) is connected in series between the

power line and the surge protector. It can trip immediately when the power supply fails or

the SPD fails and is short-circuited. It has small current (3A) action characteristics and

prevents the surge protector from (SPD) catches fire. At the same time, SSD has high surge

withstand capability and can withstand the expected surge current at the SPD installation

location to achieve the purpose of safe lightning protection.

EYZAO SSD has small size, high sensitivity and strong short-circuit breaking ability. It can

be matched with SPD of any specications and models. It adopts a single-chip free

assembly structure, which makes pairing and use more exible and achieves perfect

protection effect.

Features

  • Wide range of sho circuit current protection (3A-100kA) ;
  • T1 SSD 10/350μs waveform has surge withstand capability up to 50kA;
  • T2 SSD 8/20μs waveform has surge withstand capability up to 160kA;
  • When a surge occurs, the residual voltage at both ends of the SSD is low, and the device can be more safely protected;
  • Works peectly with SPD, safely disconnects when SPD fails, and can be reused after triggering.
Parameter  
Test category of SPD Class II
Meet the standard NB/T42150-2021
Rated operating voltage (Ue) 230/400Vac
Maximum discharge current (Imax) 80kA
Nominal discharge current (In) 40kA
Sho circuit breaking capacity (Icn) 100/65kA
Minimum delay action current (Id) 3A±1A(≤5s)
Minimum instantaneous action current (Ii) 3A±1A(≤0.1s)
Working temperature (Tu) -40℃…+80℃
Protection level IP20
Remote alarm function Implementation of installable IOF accessories
Wiring capacity Flexible cord:2.5-25mm²,Hard wire:2.5-35mm²
Recommended wiring ≥4mm²
Installation method/Incoming line mode mmDIN/”up in down out” or “down in up out”
Weight 486g
Size 72x85x76mm
Product code 921407
Scroll to Top