Fortsurge special backup protection device for surge (SSD) is connected in series between the
power line and the surge protector. It can trip immediately when the power supply fails or
the SPD fails and is short-circuited. It has small current (3A) action characteristics and
prevents the surge protector from (SPD) catches fire. At the same time, SSD has high surge
withstand capability and can withstand the expected surge current at the SPD installation
location to achieve the purpose of safe lightning protection.
Fortsurge SSD has small size, high sensitivity and strong short-circuit breaking ability. It can
be matched with SPD of any specications and models. It adopts a single-chip free
assembly structure, which makes pairing and use more exible and achieves perfect
protection effect.
Features
- Wide range of sho circuit current protection (3A-100kA) ;
- T1 SSD 10/350μs waveform has surge withstand capability up to 50kA;
- T2 SSD 8/20μs waveform has surge withstand capability up to 160kA;
- When a surge occurs, the residual voltage at both ends of the SSD is low, and the device can be more safely protected;
- Works peectly with SPD, safely disconnects when SPD fails, and can be reused after triggering.
| Parameter | |
| Test catego of SPD | Class II |
| Meet the standard | NB/T42150-2021 |
| Rated operating voltage (Ue) | 230/400Vac |
| Maximum discharge current (Imax) | 80kA |
| Nominal discharge current (In) | 40kA |
| Sho circuit breaking capacity (Icn) | 100/65kA |
| Minimum delay action current (Id) | 3A±1A(≤5s) |
| Minimum instantaneous action current (Ii) | 3A±1A(≤0.1s) |
| Working temperature (Tu) | -40℃…+80℃ |
| Protection level | IP20 |
| Remote alarm function | Implementation of installable IOF accessories |
| Wiring capacity | Flexible cord：2.5-25mm²，Hard wire：2.5-35mm² |
| Recommended wiring | ≥4mm² |
| Installation method/Incoming line mode | mmDIN/”up in down out” or “down in up out” |
| Weight | 243g |
| Size | 36x85x76mm |
| Product code | 921207 |
