Fortsurge special backup protection device for surge (SSD) is connected in series between
the power line and the surge protector. It can trip immediately when the power supply
fails or the SPD fails and is short-circuited. It has small current (3A) action
characteristics and prevents the surge protector from (SPD) catches fire. At the same time,
SSD has high surge withstand capability and can withstand the expected surge current at
the SPD installation location to achieve the purpose of safe lightning protection.
Fortsurge SSD has small size, high sensitivity and strong short-circuit breaking ability. It
can be matched with SPD of any specifications and models. It adopts a single-chip
free assembly structure, which makes pairing and use more flexible and achieves
perfect protection effect.
Features
- Wide range of short circuit current protection (3A-100kA) ;
- T1 SSD 10/350μs waveform has surge withstand capability up to 50kA;
- T2 SSD 8/20μs waveform has surge withstand capability up to 160kA;
- When a surge occurs, the residual voltage at both ends of the SSD is low, and the device can be more safely protected;
- Works perfectly with SPD, safely disconnects when SPD fails, and can be reused after triggering.
| Parameter | |
| Test category of SPD | Class II |
| Meet the standard | NB/T42150-2021 |
| Rated operating voltage (Ue) | 230/400Vac |
| Maximum discharge current (Imax) | 40kA |
| Nominal discharge current (In) | 20kA |
| Sho circuit breaking capacity (Icn) | 100/65kA |
| Minimum delay action current (Id) | 3A±1A(≤5s) |
| Minimum instantaneous action current (Ii) | 3A±1A(≤0.1s) |
| Working temperature (Tu) | -40℃…+80℃ |
| Protection level | IP20 |
| Remote alarm function | Implementation of installable IOF accessories |
| Wiring capacity | Flexible cord：2.5-25mm²，Hard wire：2.5-35mm² |
| Recommended wiring | ≥4mm² |
| Installation method/Incoming line mode | mmDIN/”up in down out” or “down in up out” |
| Weight | 237g |
| Size | 36x85x76mm |
| Product code | 921205 |
